High Flow Valves
|
 |
| Switching pattern |  |
|
 |
| Part number | VA-11-68 (6-3) | VA-11-76 (6-3) | VA-11-137 (8-4) |
| Stator material | SS | PEEK (SS reinforced) | SS |
| Rotor seal material | PEEK | PEEK | PEEK |
| Fluid path diameter | 2.0mm | 2.0mm | 1.4mm |
| Maximum pressure | 10MPa (1450psi) | 10MPa (1450psi) | 5MPa (725psi) |
| Price | $2,000 | $2,100 | $2,100 |
Selector Valves
| Switching pattern |  |
 |
|
| Part number | VA-11-127 (8-port) | VA-11-69 (6-port) | VA-11-77 (6-port) |
| Stator material | SS | SS | PEEK (SS reinforced) |
| Rotor seal material | PEEK | PEEK | PEEK |
| Fluid path diameter | 1.4mm | 2.0mm | 2.0mm |
| Maximum pressure | 5MPa (725psi) | 5MPa (725psi) | 5MPa (725psi) |
| Price | $2,100 | $2,000 | $2,100 |
Manual
| Switching pattern |  |
 |
|
| Part number | V122 (4-2) | V239 (2port) | |
| Stator material | SS | SS | |
| Rotor seal material | PEEK | PEEK | |
| Fluid path diameter | 1.0mm | 1.0mm | |
| Maximum pressure | 5MPa (725psi) | 1MPa (145psi) | |
| Price | $660 | $350 |
Large Fittings
- These fitting are used with any of the valves in this section (M8 threads)
- Also used for connecting to inlet check valves of high flow ( -33P or -33S) version of pumps
- Choose ferrule according to tubing OD
 |
 |
 |
 |
 |
|
| Tubing OD | 1/8″ | 3.0mm | 1/8″ | ||
| Part number | 9304 | 9305 | 9402 | 9405 | 9407 |
| Material | SS | PP | ETFE | ETFE | PEEK |
| Qty | 10 | 10 | 10 | 10 | 10 |
| Price | $80 | $60 | $60 | $60 | $60 |
 |
 |
 |
no image | ||
| Thread type | M8-M8 | M8-No.10-32UNF | M8-M8-M8 | M8-No.10-32UNF | |
| Part number | 9111 | 9008 | 9121 | 9107 | |
| Material | PEEK | PP | PEEK | PEEK | |
| Qty | 1 | 1 | 1 | 1 | |
| Price | $30 | $30 | $35 | $35 |
*all measurements are in mm